TL: HID Bulb replacement

waznut · 11-05-2009, 11:18 AM

How easy is it to replace the hid blubs?Help on instructions, please.

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Acurazine!

JS + TL · 11-05-2009, 12:20 PM

what car do you have?

if you hve 3G TL, you have to take off the bumper, take off that round lid thingy and just swap out the bulbs. That's it.

**97BlackAckCL** · 11-05-2009, 1:27 PM

Most d2r and d2s bulbs are just held in by a clip, very simple removal and replacement

n0rmal · 11-05-2009, 1:50 PM

^^On some cars, especially the 3G TL it's a b*tch to get to the bulb. You have to take the bumper off.

On the 2G, it couldn't be easier, 5 minutes is all it took me.....

jonrob287 · 11-09-2009, 1:04 AM

i have a 2G TL....want to know exactly how to take off the passenger low beam buld so i can put in new one....any help?

Fito510 · 11-09-2009, 1:34 AM

ur gonna need a torque bit or a small flat head screw driver to take off the screw that locks the cover once u have that off u just turn the cover and it comes off then its just a small clip once u remove the connector also by turning it the its just a small clip holding the bulb like n0rmal said it couldn't be easier, 5 minutes is all it took me.....
it may sound complicated but its very simple

11-05-2009, 1:50 PM	#4
n0rmal TH3 BUFF M/\ST3R 2003 Acura CL Trader Rating: (6) Join Date: Feb 2009 Location: CALI, 818 Posts: 2,573	^^On some cars, especially the 3G TL it's a btch to get to the bulb. You have to take the bumper off. On the 2G, it couldn't be easier, 5 minutes is all it took me..... __________________ WORK l MICHELIN l TEIN l PROGRESS l* DBA BRAKES l EBC l KENWOOD l NAVONE ENGINEERING l XTANT I ADIRE AUDIO I DEKA l APEXCONE l HELLA I MAGNAFLOW FS: STAGGERED WORK WHEELS

11-05-2009, 1:27 PM	#3
97BlackAckCL Moderator 1997 Acura CL My Garage Trader Rating: (3) Join Date: Jan 2005 Location: ShitsBurgh Age: 28 Posts: 37,490	Most d2r and d2s bulbs are just held in by a clip, very simple removal and replacement

11-09-2009, 1:04 AM	#5
jonrob287 Registered User Trader Rating: (0) Join Date: Nov 2009 Age: 22 Posts: 1	i have a 2G TL....want to know exactly how to take off the passenger low beam buld so i can put in new one....any help?

11-09-2009, 1:34 AM	#6
Fito510 2003 Acura CL Type-S Trader Rating: (0) Join Date: Apr 2009 Location: Richmond,ca Posts: 44	ur gonna need a torque bit or a small flat head screw driver to take off the screw that locks the cover once u have that off u just turn the cover and it comes off then its just a small clip once u remove the connector also by turning it the its just a small clip holding the bulb like n0rmal said it couldn't be easier, 5 minutes is all it took me..... it may sound complicated but its very simple