Quest for the cleanest modded TL-S continues! (New mods and V1 install 4/28)
Thanks man. The front IMHO looks better with the way you got it. That's why I was like, didn't look like the A-Spec kit.
Might have to do that to mine as well.
And thank you for the WB.
It's great to be back!
Might have to do that to mine as well. And thank you for the WB.
It's great to be back!
Thread Starter
Bone stock tl-s
iTrader: (1)
Joined: Oct 2005
Posts: 2,511
Likes: 63
From: La Habra CA
i didn't make it but i thought of it and made it reality. a shop did the work for me

wow quite a statement. thank you.
try to make one
ha,ha! funny
thanks bro.
try to make one

ha,ha! funny
thanks bro.
Thread Starter
Bone stock tl-s
iTrader: (1)
Joined: Oct 2005
Posts: 2,511
Likes: 63
From: La Habra CA
here is a closer look

alot of people with a Type-S want this look because its cleaner than the Type-s A-spec. however few if any have done it. they rather opt to get the base bumper and the base spoiler and call it a day.
more custom shit!!!!
my center cubbys are are being occupied by my 3sixty vol knob and EDFC unit. i wanted to do something different, the VSA button mod was out of the question i needed a spot for three switches/buttons. so fabricated a switch box for the P.I.E. X-3 , nav2go and video switcher. mounted it in the driver side lower door compartment. i extended the wires of all switches with some 10 conductor flat cable. ran it through the factory door harness, for a clean install.
i could have just put them under the dash or in the center console compartment, but thats not me and plus thats way too easy and boring wanted these at my fingertips, all i have to do is flick it open, or just close it. these are in a perfect spot






my center cubbys are are being occupied by my 3sixty vol knob and EDFC unit. i wanted to do something different, the VSA button mod was out of the question i needed a spot for three switches/buttons. so fabricated a switch box for the P.I.E. X-3 , nav2go and video switcher. mounted it in the driver side lower door compartment. i extended the wires of all switches with some 10 conductor flat cable. ran it through the factory door harness, for a clean install.
i could have just put them under the dash or in the center console compartment, but thats not me and plus thats way too easy and boring wanted these at my fingertips, all i have to do is flick it open, or just close it. these are in a perfect spot






I need to stop playing modern warfare 2 and just finish my mods.. lol .. dangit im getting up early tomorrow.. lol
Thread Starter
Bone stock tl-s
iTrader: (1)
Joined: Oct 2005
Posts: 2,511
Likes: 63
From: La Habra CA
ok guys here are some pics of my latest install, my custom rear center console. a few members asked me to make a DIY on it, im not even sure i did it using the right technique. so dont laugh! here are some pics of the process and the finished results.
i basically mocked up a frame out of wood cardboard and metal, the metal was to get the exact shape and slope of the existing console edges.


after i hot glued the pieces together i wrapped it in speaker cloth material and brushed on some fiberglass resin over the whole thing

after id dried i laid some fiberglass mat over the whole thing and lined the inside with mat and brushed on more resin to strengthen it. when i finished this it was pretty damn strong.

after it dried i laid down a layer of bondo over the whole thing and sanded it smooth


once i got it to where i liked it i took it to my custom auto upholstery guy, to be wrapped in leather. that took a few days so while i was waiting i modified my dvd player remote. i got sick of aiming it to the back where its mounted in the rear armrest.

so i relocated the signal sensor. i cant stop modding
now i can just sit it on my center armrest and control it without pointing it backwards.

ok here's the the finished piece.





video playback mode



comments welcome
i basically mocked up a frame out of wood cardboard and metal, the metal was to get the exact shape and slope of the existing console edges.


after i hot glued the pieces together i wrapped it in speaker cloth material and brushed on some fiberglass resin over the whole thing

after id dried i laid some fiberglass mat over the whole thing and lined the inside with mat and brushed on more resin to strengthen it. when i finished this it was pretty damn strong.

after it dried i laid down a layer of bondo over the whole thing and sanded it smooth


once i got it to where i liked it i took it to my custom auto upholstery guy, to be wrapped in leather. that took a few days so while i was waiting i modified my dvd player remote. i got sick of aiming it to the back where its mounted in the rear armrest.

so i relocated the signal sensor. i cant stop modding

now i can just sit it on my center armrest and control it without pointing it backwards.

ok here's the the finished piece.





video playback mode



comments welcome
Thread Starter
Bone stock tl-s
iTrader: (1)
Joined: Oct 2005
Posts: 2,511
Likes: 63
From: La Habra CA

c'mon Sean, this took me a while i worked on it like 2 hrs a day about as much time as you spend watching UFC on spike and TUF, oh yea, i forgot southpark too

stop being lazy and mod your ride!Hmmmm.........now thats an idea
although i already have another mod in the works
I am literally speechless right now... your car is absolutely unbelievable man. Not only that, but the fact that you are doing this all yourself just amazes me even more.
You can change the title of this thread to:
The Cleanest, Most Unique Modded TL Ever In Existence... Ever.
Amazing
You can change the title of this thread to:
The Cleanest, Most Unique Modded TL Ever In Existence... Ever.
Amazing
Now I know why this thread has made it to nine pages and soon to be ten......Just sick, I love everything about it.
I also have a DVD player mounted in the rear arm rest but I installed an IR cable that I ran up to the underside of the dash so I could point it to the front. Did your DVD player have an option like that?
I also have a DVD player mounted in the rear arm rest but I installed an IR cable that I ran up to the underside of the dash so I could point it to the front. Did your DVD player have an option like that?
I have some heavy mods myself and they are OK......but I'll be the first to admit; It's all about the execution. And your car is head of the class!
















AMAZING WORK!!!
















AMAZING WORK!!!
Last edited by rockyfeller; Nov 21, 2009 at 12:49 PM.
94 DC4 RS LSV/Turbo
iTrader: (1)
Joined: Jul 2007
Posts: 11,734
Likes: 12
From: New York City | Stuck in Traffic
DAYUM... that is one clean rear console... the leather is pretty close... usually leather looks dead ass the same shade... then in pics it looks completely off... but yeah it's a pretty close match... and damn that console is clean... looks like you been watching "Unique Whips" on speedtv.... ROFL....
man can't get over how clean it looks...
ps. time for rear center seatbelt delete
man can't get over how clean it looks...
ps. time for rear center seatbelt delete
Last edited by stillhere153; Nov 21, 2009 at 07:16 PM.
Joined: Jan 2008
Posts: 36,545
Likes: 6,470
From: Kansas City, MO (Overland Park, KS)
Jaime, that is unbelievably fantastic. I would say it turned out better than expected, but I KNEW it would turn out that awesome! Plus, I think it's the only car that would actually appreciate in value.
Thread Starter
Bone stock tl-s
iTrader: (1)
Joined: Oct 2005
Posts: 2,511
Likes: 63
From: La Habra CA
where were you at the mini meet? I am literally speechless right now... your car is absolutely unbelievable man. Not only that, but the fact that you are doing this all yourself just amazes me even more.
You can change the title of this thread to:
The Cleanest, Most Unique Modded TL Ever In Existence... Ever.
Amazing
You can change the title of this thread to:
The Cleanest, Most Unique Modded TL Ever In Existence... Ever.
Amazing
Now I know why this thread has made it to nine pages and soon to be ten......Just sick, I love everything about it.
I also have a DVD player mounted in the rear arm rest but I installed an IR cable that I ran up to the underside of the dash so I could point it to the front. Did your DVD player have an option like that?
I also have a DVD player mounted in the rear arm rest but I installed an IR cable that I ran up to the underside of the dash so I could point it to the front. Did your DVD player have an option like that?

thank you sir
hahahaha
DAYUM... that is one clean rear console... the leather is pretty close... usually leather looks dead ass the same shade... then in pics it looks completely off... but yeah it's a pretty close match... and damn that console is clean... looks like you been watching "Unique Whips" on speedtv.... ROFL....
man can't get over how clean it looks...
ps. time for rear center seatbelt delete
man can't get over how clean it looks...
ps. time for rear center seatbelt delete


type-s

trying to stay in your league homie!
thanks
yeah, wasn't about to do the headrests, i've got two in the visors. it would have been too much. this i think, like you said makes it look so classy. almost OEM.









