on1wheel01

Well I decided I was going to out do all past systems. So I anted up and went with a Sundown Custom Nightshade 18" sub with cooling and a extra spider(also more but cant remember). Powered by a New Sundown Saz2000D. In a 7.27 cubic foot box(before port and sub displacement). It's 5 cubes after all said and done. Tuned to 34 hz with a 7" port. The box is made of birch wood. I also am cutting out the back deck where the 6x9's go. And making a custom panel with a pressure fitting for the air flow to enter the cab better. I didn't want to cut into the car but my friend Justin convinced me when he said I should be able to do around a 148 or so on music. He works for a big audio store around here and is good friends with the owner of Sundown Audio(so he knows his stuff). I also am thinking of doin to cusotm made 6.5's on a Sundown 50.4. So far we have some of the box assembled and will be working on it more in the next few weeks(as he is busy with other buils some pics included). When all said and done the amps will be recessed into the spare tire well, and all covered in vynal. Should be some kinda sick. He said the goal is to make my trunk jump 2 inches and make my windows flex like crazy lol.






Here is a pic of my sundowns guts compaired to a Lanzar 3800 watt's guts lol just doesnt seem fair to the lanzar lmao




And a few of one of his other builds

eggyhustles

tune lowerrrrrrrrrrrrrr

on1wheel01

lower why? I wanna be able to hit a wide variety of tones and also i plan on competing a bit

mattastick

Eggy, while I agree, it's what he wants. Him and I went back and forth trying to figure out what he needed, and this should work just fine.

Brian, looking good dude. I never thought I'd see a box this big in the trunk of a CL. That sucker's huge. Should be very interesting...

on1wheel01

Yea Hustin is wanting me to tune lower but he said he would want me to be able to play the 40's and such. What you guys reccomend I'll talk with him in a few hours when I go over there. And man he's puttin 3 18" shades in his silverado, he previously had 12 sundown sa 12's dear god it hit. This guy knows his shyt

eggyhustles

12 12's? wtf

maybe it's just me but im only a fan of single sub setups

on1wheel01

well his shyt was just stupid loud. He is in comps all the time and also in team sundown. Being best friends with the owner of the co helps lol.

on1wheel01

Ok and for the new updates we have cut the back dexk made a new top deck piece covered it in vinyl, also made the compression piece for the port covered it in speaker cloth(the beige piece it's currently goin to black cloth as didnt like the look in beigh). Next tongiht we are working on the box more. Man this is going great.

richardparker

iTrader: (7)

Looking good,sure to get loud from the trunk now.

on1wheel01

Thanx man yea should get nasty loud. Im really glad we chopped up the deck and went custom with it man it looks so sick

on1wheel01

Well here is the finished product of the rear deck looks amazing . Also just ordered a sundown 50.4



And one of the Prelude finished(Justin does great work)

mattastick

Lookin good dude. Can't wait to see more. As for tuning, well, I think you know my stance. <32 or fail. But the car will likely peak at 43hz, so if you're wanting numbers when/if you take it into the lanes, I'd tune up near the 35hz mark. Should do well both ways for what you need...

on1wheel01

Well we did a bit of work on the box today. Got the port walls cut and Justin is double baffling them( he said it would work out best that way, also put bondo on the inside to make the layers smooth).

on1wheel01

Ahh and here is a few pics of the beast itself

on1wheel01

Well decided to mess around with the stock tweeter location in the dash took the 1" bose out and put in some after market ones cheap ones but man they scream.




Also just picked up these focal rims today with brand new toyo tires got em all for $100 woot. 2 are not holding air because they have dirt and stuff on the bead from the guy running off the road but hey still a steal the tires are worth way way more than i paid chrome and all should look good on the car if i dont sell em for profit

97BlackAckCL

iTrader: (6)

Very unique rear deck, I dig it, did you use the stock deck and just build on top of it?

on1wheel01

Nope we took it out completely and just used the new one it's made of 1/2" mdf, the black insert is 7/8 birch with speaker grill cloth over it. We have a slight gap where it meets the seats so me may include the stock deck also not sure yet. The thing I like about the new deck is it just about looks stock

97BlackAckCL

iTrader: (6)

Yeah, it looks great, I was just wondering how it was mounted

on1wheel01

It's held in with screws

on1wheel01

Well had to work the past 2 nights but Justin worked on it in my absence here are some pics. goal is to have all finished this sat






the glob of resin is just it moving it did not dry that way

on1wheel01

Well today we decided to trash the current port and do another. Also tonight I will be installing my Alpine deck ipod interface cable, and running 2 sets of rca's for the 50.4. Also will be taking off the door panels and getting things ready for the mids and highs

on1wheel01

Putting the box in from the cabin

Decided to put 8" mids and some tweets in door panels also

richardparker

iTrader: (7)

How this guy with prices on his work ? Also can he do any glass work.

mattastick

Richard, there's a ton of glass in that box... Nice job Brian, there's some serious work in that box... Very impressive...

on1wheel01

Richard yea he's pretty good on his prices just depends on what you want. Of coarse fiberglass is expensive especially if you use the good stuff. I don't even want to talk about how much I have in the build ill just say It's over 2k and leave it at that lol. His work is def extremely impressive. I can get you 2 in contact if you want. He is putting 3 18" nightshades in his silverado he previously has 12 12" sundown sa. Man that shit beat. Hes also a nc rep for sundown so can get any thing desired.

Thanks Matt yea we have a ton of hours into the box. We are done for tonight sadly as the wifes are raising hell lol. So work starts back tomorrow morning. And will be done by saturday. Pretty stoked to hear how loud it is.

97BlackAckCL

iTrader: (6)

very nice build, keep it up

mattastick

Hey Brian, something just occurred to me, did you pull the support bars for the trunk lid? If so, how hard was it? I'm looking at this build, and it gave me an idea for a possible rebuild for a 4th order...

on1wheel01

Yea i pulled those dang black bars, man it was a pita to get them off but now wish we still had them on as the trunk lid weighs a ton and i need a 2x4 to keep her open. We are playing with the idea of actuators to open her up.

on1wheel01

Well the beast is in the car. So far just the 18 and some 1" tweets are hooked up. The door panels will be worked on soon. But man is the ns freakin loud vids to come when completed

richardparker

iTrader: (7)

Yea I might want to have him build a vented back deck like you have.
Some might say I'm going backwards with my setup but,I just ordered 4 more of the same 12's I already have.
I plan on moving the 2 inside the body to the trunk with the new 4.
So I'll have 6 in the trunk and 2 in the back seat facing in.
All 8 will see 400w rms.
Not saying today but,how much could he do my rear deck for?

The box looks good and solid.

97BlackAckCL

iTrader: (6)

Great build, nice to see someone else putting work into their system on a 1G CL besides matt and I

mattastick

You got that right Chris. Brian, the build's lookin sexy. I can't wait to see the final product, along with the nightshade tearing your car apart...

on1wheel01

Richard I'll ask him tomorrow about pricing. Youd have to come up and let him take out your current one then go from there. But that would be between u guys ill ask him on $$$$.

Chris thanx yea i love havin some bumps in the trunk been to long without it.

Matt yea I can't wait either lol it suxx ridin with the 2 1" tweets and the 18. Door panels will be getting worked on tomorrow. Ill post a vid when they are done even though the trunk trim panels will be awhile.

on1wheel01

Richard my buddy said $250 for the deck thats all labor and materials and im guessin installed. I do gotta say man it made a day and night diff on my car.

on1wheel01

Well another update I just picked up 6 C&D batts 2 for my car 4 to sell. I am also thinking of selling the 18 and goin back 2 2 12's or 2 10's. Im am very happy with the 18 but I want to make my trunk look show and bumpin. Time will tell though. If I did 12's or 10's. I would get another saz2000d and have one on each. Oh that should be loud.

mattastick

You'll need more electrical support for 2 SAZ-2000s... 2 C&D's won't cut it... 2 D3100's would though, as long as you have the alt to charge them up...

on1wheel01

Yea if i went that route id do 4 C&D's as hell i got 6 lol and figure something out to run another alt. maybe be the first 1st gen with dual alts. Unless it's been done before but i havent seen it

mattastick

Why are you going to kill your suspension like that? Why not run fewer batteries (at around the same cost) and save your rear suspension? Only makes sense to me...

on1wheel01

Eh not to worried about that. Who knows what route ill take ne ways. Depend son how satisfied with the end result with this set up. Well whenever my buddy finally finishes the doors. And I can get these way way cheaper than the ones you said.

on1wheel01

Well just picked up a digital volt meter for the car. Blue led's gonna either fab it into the pocket under the radio, or fab up a new ash tray and put it here.